SK-HD1300 Progressive HDTV Production Camera

The SK-HD1300 is Hitachi’s top-of-the-line progressive scan HD Studio and EFP camera. Outstanding images are acquired by three 2/3” 2.3 megapixel progressive scan MOS imagers. Hitachi’s implementation of the most advanced digital processing technology provides low-noise and high dynamic range pictures. The HD signal is generated by our newest UAIT (Ultra-Advanced) MOS imagers. Digital Signal Processing is handled by 38-bit Hitachi DSP’s. The SK-HD1300 is progressive scan throughout the entire camera chain and outputs 1080/60p, 1080i, 720p and SD-SDI. A new CU-HD1300(X) multi-format CCU connects to long-range triax and/or SMPTE fiber optic cable by simply switching the camera head adapters. The 3G HD signal is generated by our newest UAIT (Ultra-Advanced) 2/3” 2.6 megapixel MOS imagers. An optional 4K upconverter with 12G output is available.

Features & Functions

• New CU-HD1300FT with options for SMPTE fiber and/or triax cable connections:
  • CU-HD1300F connected via SMPTE fiber outputs.
  • CU-HD1300T connected via triax cable outputs 1080/60p, 1080i, 720p and SD-SDI.
• NEW 2/3-inch, 1080/60p, progressively scanned, (Ultra-Advanced) UAIT-MOS sensors.
• 1,100TVL standard resolution.
• >60dB signal to noise ratio (1080/60p without noise reduction)
• 38-bit per pixel per R,G,B channel Hitachi 40nm digital processing technology
• 3Gbps progressive HD-SDI signal handling from end-to-end.
• Switchable between progressive and interlaced signal processing, transport and outputs.
• Multi-format global design outputs signals for most TV broadcast and production standards.
• SMPTE-311M hybrid optical fiber cable provides transmission and camera power up to ~9,842 feet.
• Advanced triax system with ultra-low-latency H-264 codec and multilevel digital modulation for long cable runs.
• Triax cable length up to ~4,250 feet with 9232 ½” triax cable. ~2,300 feet with 9267 3/8” triax. (1080i mode).
• The camera can operate with common-off-the-shelf Single-Mode fiber (with external camera head power).
• Single-Mode fiber can be used up to 10Km (~33,000ft.) without external adapters, accessories or modifications.
• The camera system can use an optical routing system to connect a large network of camera heads and CCUs.
• NEW control panels (SU-1000 and RU-1500 series) can control up to 128 cameras with a TCP/IP network.
• CCUs can be addressed and controlled via a common TCP/IP data network.
• Dual 5-position motorized filter wheel is optionally available.
• Low power 24W consumption (camera head + lens + optical cable adapter)
• 2-piece dockable design improves maintenance and equipment flexibility.
• Choice of multiple joystick or rotary-knob operation panels
• Prompter and talent monitor power and video outputs available at the camera head.
• Independent HD-SDI VF output for crane or Jib installations.
• VF Focus assist (VF Area marker, Focus indicator and gauge)
• Large selection of studio, EFP and ENG viewfinders.
• Compatibility with all Fujinon Precision Focus lenses.
• Digital optical extender function
• 2 independent CCU Returns, inputs can be HD-SDI single or dual link, or SD analog or digital selectable
• Full automatic setup using Gray Scale.
• Digital registration or lens’ lateral chromatic aberration adjustment.
• RLACTM: Real-time Lens Aberration Correction makes the best 2/3-in HDTV lenses look even better.
• Direct data transfer from SU or SD memory cards used at camera head and control panels.
• HD signal linear masking & 12-vector color painting.
• Independent control of HD & SDTV detail
• Ultra Gamma (Selectable Gamma table).
• Black stretch/ black press.
• Preset Masking (6 settings: DEFAULT, ITU-709, SMPTE-240M, SMPTE-2020, NTSC, EBU).
• 2 channel Flesh-tone masking and multiple memory Flesh-tone detail correction settings.
• Knee saturation and Knee detail functions.
• Real-time and offline diagnostic system with character display superimposed on PIX video output.
• Accepts Analog VBS/BBS or HD Tri-level sync as genlock.

Configuration

• Available Studio Adapter for use with all Broadcast box, compact studio and hand-held 2/3-inch bayonet lenses.
• Cable-less Studio Adapter interface allows trouble free operation.
• 2-piece dockable design allows easy configuration change and maintenance.
• Maintains backwards compatibility with existing HITACHI HDTV control panels, cables, and viewfinders.
• Ethernet control and assignment of control panels and CCUs.
• Can operate over Single Mode Fiber (SMF) without expensive converters.

Camera System Accessories

(Click on pictures to enlarge – opens in a new browser window)

Camera Control Units (CCU’s)

Camera Head Adapter

Control Panels

Studio Adapter

Viewfinders

Additional System Accessories

KXWell Pan/Tilt Systems for Studio Cameras

All Brochures

• Product Brochure (3.52MB)
• CA/CU550 Product Brochure (1.88MB)

Camera Control Unit

• CU-HD1300 CCU Operation Manual (4.79MB)
• CU-HD1200 Operation Manual (2.9MB)
• CU-HD1000 Operation Manual (4.05MB)
• TU-HD1000 Operation Manual (2.61MB)
• CU-HD500 Operation Manual (2.97MB)

Camera Head Adapter

• CA-HF550 Operation Manual

Control Panels

• SU-1000 Operation Manual (3.82MB)
• RU-1500JY/VR Operation Manual (4.88MB)
• Ross Dashboard Control Systems
• RU-1000 Operation Manual (2.00MB)

Studio Adapter

• SA-1000 Operation Manual (1.93MB)

Viewfinders

• VF-701-HDA User guide (89KB)
• VF-PBM-307 Operation Manual (1.30MB)
• HDF-700H Operation Manual (500KB)
• VF-L90HD Operation Manual (204KB)
• HDF-EL800H Operation manual (780KB)

Additional System Accessories

• KXWell Control Panel Brochure (3.3MB)
• KT-PD50 Brochure (2.2MB)
• KXWell Control Panel Brochure (3.3MB)